Three-Dimensional Analysis of Permanent Covering Behavior of Gelevard Dam Injection Gallery and Optimal Design of Tunnel Coverage

Document Type: Research Paper

Authors

1 M.S. in Civil Eng. Soil Mechanics and Foundation

2 Department of Civil Engineering, Islamic Azad University, Gorgan Branch, Kordkuy Center, Iran

Abstract

Gelevard dam is one of the under construction dams in Iran. Gallery tunnels have been executed to implement the possibility of appropriate grout curtain, complete sealing of support and dam foundation. Current paper has studied and analyzed the left bottom gallery (LG3) with length of 380 meters, 3 meters drilling diameter and optimal coverage concrete thickness of gallery. The required armature in the appropriate host rock pile has been determined average and weak. Accordingly, the optimal thickness of gallery covering concrete has been assumed 30 centimeters in the roof and walls, 45 centimeters on the floor. Geometry of this area has been modeled commensurate with the reality in the software limited elements as much as possible. Results have been presented in graphs, after evaluation of place changes, minimum and maximum tensions, axial force, shear force and bending moment. The obtained results indicated that30 centimeters thickness permanent concrete coverage without armature and 1.5 meters and 3 meters thickness of grout area of weak host rock is suitable for the host rock with appropriate quality and average one.  The 40 centimeter thickness armature concrete coverage and injection thickness of 4.5 meters can be appropriate as well.

Keywords


Andjelkovic V, Lazarevic Z, Nedovic V, Zdravko Stojanovic, 2013. Application of the pressure grouting in the hydraulic tunnels. Technology. August: 165–179.

Arnau O, Molins C, 2012. Three dimensional structural responses of segmental tunnel linings. Engineering Structures. 44: 210-221.

Behfarnia K, Behravan A, 2014. Application of high performance polypropylene fibers in concrete lining of water tunnels. Materials & Design.  55: 274–279.

Design of tunnels and shafts in rock, EM 1110-2-2901 30 May 1997. Department of the Army, Engineering Manuals, U.S. Army Corps of Engineers, Washington, DC 20314-1000.

Galli G, A Grimaldi, Leonardi A, 2004. Three-dimensional modeling of tunnel excavation and lining, Computers and Geotechnics. 31(3): 171–183.

Kolymbas D, 2005. Tunneling and tunnel mechanics. A Rational Approach to Tunnelling,Springer-ISBN: 978-3-540-25196-5Verlag Berlin, Heidelberg.

Pérez-Romeroa J, Oteob CS, Fuente P, 2007. Design and optimization of the lining of a tunnel in the presence of expansive clay levels. Tunnelling and Underground Space Technology. 22(1): 10–22.

Rasouli M, 2009. Engineering geological studies of the diversion tunnel, focusing on stabilization analysis and support design. Iran, Engineering Geology. 8: 208–224.

Vassilis K, Papanikolaou, Andreas J, Kappos AJ, 2014. Practical nonlinear analysis of unreinforced concrete tunnel linings. Technology. February: 127–140.

Vermeer PA, Möller SC, Ruse N, 2003. On the application of numerical analysis in tunnelling. In: Post proceedings 12th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, 4–8 August, Singapore.

Wanger H, Scholter A, 1996. Tunnel boring machines. Trends in Design and Construction of Mechanized Tunneling, Rotterdam: Published by A.A. Balkema.

Wu CL, Penzien J, 1998. Stresses in linings of bored tunnels. Earth quake Engineering and Structural Dynamics. 27: 283-300.

Zdravkovic L, Potts DM, St John HD, 2005. Modelling of a 3D excavation in finite element analysis. Geotechnique. 55(7): 479–513

Amir Yaghoubi Nezhad, S. H., Atefeh Mehrabi Far, Masoumeh Piryaei, Seyed Mojtaba Mostafavi. (2019). Investigation of Shigella Lipopolysaccharides Effects on Immunity Stimulation of Host Cells. International Transaction Journal of Engineering, Management, Applied Sciences and Technologies, 10, 465.

Ceisil, U. (2018). E-Awareness of University Student through Smart Phones and Developing Social Networks. Journal of Humanities Insights, 02(03), 139-145. doi:10.22034/JHI.2018.70850

Jinadu, O., Oluwafemi, S., Soyinka, M., & Akanfe, K. (2017). Effects of International Financial Reporting Standards (IFRS) on Financial Statements Comparability of Companies. Journal of Humanities Insights, 01(01), 12-16. doi:10.22034/JHI.2017.59551

Mehrabifar, A., & Rahmati, M. (2017). Investigation of Anticancer Effects of Dacarbazine Hydrogel in the Injectable Form and its Release. MedBioTech Journal, 01(01), 15-21. doi:10.22034/MBT.2017.60333

Mostafavi, S. M., Bagherzadeh, K., & Amanlou, M. (2017). A new attempt to introduce efficient inhibitors for Caspas-9 according to structure-based Pharmacophore Screening strategy and Molecular Dynamics Simulations. MedBioTech Journal, 01(01), 1-8. doi:10.22034/mbt.2017.60325

Seyed Mojtaba Mostafavi1, H. M., & Taskhiri, M. S. (2019). In Silico Prediction of Gas Chromatographic Retention Time of Some Organic Compounds on the Modified Carbon Nanotube Capillary Column. Journal of Computational and Theoretical Nanoscience, 16(151), 156.

Seyed Mojtaba Mostafavi, A. R., Mina Adibi, Farshid Pashaee, Masoumeh Piryaei. (2011). Modification of Glassy Carbon Electrode by a Simple, Inexpensive and Fast Method Using an Ionic Liquid Based on Immidazolium as Working Electrode in Electrochemical Determination of Some Biological Compounds. Asian Journal of Chemistry, 23(12).

Z. Man, A. G. E., S. M. Mostafavi,, & Surendar, A. (2019). Fuel oil characteristics and applications: economic and technological aspects. Petroleum Science and Technology